Audirect Beam3 Plus MQA DAC& Headphone AMP

Features:-

>Qualcomm CSR8675 Bluetooth Chip.

>Dual OP-AMP Chips.

>ES9281AC DAC Chip.

>MQA Decoding Support.

>High-Resolution Decoding.

>Dual Headphone Output Ports: 3.5mm+4.4mm.

>Easy to switch between USB and Bluetooth DAC/AMP mode.

>Three-level gain mode.

>THD+N: 0.0003%.

>USB Input Type: USB Type-C.

>Frequency Response Range: 20Hz-40kHz.

>SNR: -118dB.

>Output Parameters(4.4mm): ≥110mW(16Ω) ≥230mW(32Ω) ≥27.78mW(600Ω).

>Output Parameters(3.5mm): ≥141mW(16Ω) ≥122mW(32Ω) ≥7mW(600Ω).

>Net-Weight: 69grams.

>Dimensions: 75mm x 39mm x 12mm.

Audirect Beam 3 Plus is the latest portable USB and Bluetooth Portable DAC/AMP device bringing high-resolution audio to everyone with its advanced ES9281AC DAC chip and Dual OP-AMP architecture. Beam 3 Plus features the latest Qualcomm CSR8675 Bluetooth chip for high-res wireless Bluetooth connectivity. With a USB connection Beam 3 Plus decodes hi-res PCM and DSD signals along with MQA audio files too.

Your Pocket Buddy For High-Resolution Music:-

Audirect Beam 3 Plus is a HiFi Bluetooth and USB DAC/AMP that has a small-sized lightweight design that makes it easy to carry around in your pocket. Carry your high-resolution freedom anywhere you go. Audirect Beam 3 Plus can serve as both Bluetooth or USB high-resolution DAC/AMP device. There's a switch at the top of the Beam 3 to choose between both modes.

Wireless Bluetooth Connectivity With High-Resolution Codecs Support:-

Audirect Beam 3 Plus adopts the power of Qualcomm's latest CSR8675 Bluetooth chip that provides seamless wireless Bluetooth connectivity with high-resolution codecs support. The Beam 3 Plus supports LDAC AptX HD AptX SBC and AAC wireless codecs for high-resolution streaming over the Bluetooth connection.

Premium Sabre DAC Chip With Dual Independent OPAMPs:-

Audirect Beam 3 Plus is equipped with an ES9281AC DAC chip by ESS Sabre Technologies that provides extremely clean and transparent audio decoding with low distortion and high SNR ratings. It is paired with two independent OPAMPs that produce a powerful output stage for the users.

High-Resolution Audio Signal & Full MQA Signal Decoding:- 

Along with high-resolution PCM and DSD decoding the latest Audirect Beam 3 Plus is capable of MQA decoding. MQA(Master Quality Authenticated) is an advanced technology where the high-resolution music files are wrapped into smaller file sizes to make them easy to store and stream. MQA certified devices unfold the MQA files to provide a high-resolution experience.

Single-Ended As Well As balanced Headphone Output Ports:-

Audirect Beam 3 Plus supports both single-ended and balanced headphone connections. It houses a single-ended 3.5mm port and another 4.4mm balanced headphone output port.  The balanced port outputs up to 230mW of power while the single-ended port provides up to 141mW of power both of which are more than enough for powering modern IEMs and headphones.

Adjustable Three Level Gain:- 

Audirect Beam 3 Plus has a three-level gain mode that can be adjusted using the gain switch on the side of the device. It helps the users to pair the Beam 3 Plus with sensitive as well as demanding headphones.